Chemical Protection & Cleanroom Products
DuPont ProShield® 20 SFR. Limited flame spread coverall (index 1) with hood. Stitched external orange seams. Elasticated wrists, ankles, face and waist. White.
Full Part Number :
Fabric / Material :
ProShield® 20 SFR
Hooded coverall with elastics
Stitched (external), orange
50 per box, individually packed.
DuPont ProShield® 20 SFR. Hooded coverall available in white and in sizes MD to 3X. 3-piece hood and 3-piece gusset for optimal fit. Elasticated face, wrists, waist and ankles. Generous fit offering high freedom of movement when wearing index 2 or 3 flame-retardant workwear beneath.
ProShield® 20 SFR garments are made from a non-halogenated, flame-retardant polypropylene SMS nonwoven fabric, providing limited protection against flame spread (index 1) in addition to protection against particles and limited liquid splashes or sprays of water-based liquids. They must always be worn on top of a primary FR protection garment, such as Nomex® .
ProShield® 20 SFR garments are used across a range of applications, including those in the petrochemical and railway industries, welding, gas and metal applications and certain Ex-Zones (refer to instructions for use).
|Product Size||Article Number||Additional info|
Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.
|Abrasion Resistance 7||EN 530 Method 2||>100 cycles||2 of 6 1|
|Basis Weight||DIN EN ISO 536||60 g/m2||N/A|
|Exposure to high Temperature||N/A||Melting point ~165 °C||N/A|
|Flex Cracking Resistance 7||EN ISO 7854 Method B||>100000 cycles||6 of 6 1|
|Flex Cracking Resistance at -30°C||EN ISO 7854 Method B||>4000 cycles||N/A|
|Limited Flame Spread 7||EN ISO 15025:2003 procedure A||Pass||Index 1 4|
|Puncture Resistance||EN 863||>5 N||1 of 6 1|
|Surface Resistance at RH 25%, inside 7||EN 1149-1||< 2,5 • 109 Ohm||N/A|
|Surface Resistance at RH 25%, outside 7||EN 1149-1||< 2,5 • 109 Ohm||N/A|
|Tensile Strength (MD)||DIN EN ISO 13934-1||>30 N||1 of 6 1|
|Tensile Strength (XD)||DIN EN ISO 13934-1||>30 N||1 of 6 1|
|Trapezoidal Tear Resistance (MD)||EN ISO 9073-4||>20 N||2 of 6 1|
|Trapezoidal Tear Resistance (XD)||EN ISO 9073-4||>20 N||2 of 6 1|
Information relating to the protective performance of a garment according to European standards where applicable. Includes important characteristics such as protection against radioactive contamination, seam strength and shelf life. Inward leakage and resistance to penetration by liquids, according to the relevant Type classification, are also detailed.
|Nominal protection factor 7||EN 1073-2||>5||1 of 3 3|
|Seam Strength||EN ISO 13935-2||>75 N||3 of 6 1|
|Shelf Life 7||N/A||18 months 6||N/A|
|Type 5: Inward Leakage 11||EN ISO 13982-2||8 %||N/A|
|Type 5: Inward Leakage of Airborne Solid Particulates||EN ISO 13982-2||Pass||N/A|
|Type 6: Resistance to Penetration by Liquids (Low Level Spray Test)||EN ISO 17491-4, Method A||Pass||N/A|
The comfort of a protective garment during use is largely determined by its weight, its permeability to vapour and air (breathability) and insulating properties. Data on these attributes is provided according to test method and, as with other data, can be compared by garment.
|Air Permeability (Gurley method)||ISO 5636-5||Yes||N/A|
|Air Permeability (Gurley method)||ISO 5636-5||0 s||N/A|
|Thermal Resistance, Rct||EN 31092/ISO 11092||34.3*10-3 m2 *K/W||N/A|
|Thermal Resistance, clo value||EN 31092/ISO 11092||0.211 clo||N/A|
|Water Vapour Resistance, Ret||EN 31092/ISO 11092||2.2 m2 *Pa/W||N/A|
A specific test method, EN ISO 6530, is used to measure the indexes of penetration, absorption and repellency of protective clothing material exposed to liquid chemicals. Results listed here reflect the penetration resistance and repellency of DuPont fabrics to 30% sulphuric acid and 10% sodium hydroxide.
|Repellency to Liquids, Sodium Hydroxide (10%)||EN ISO 6530||>95 %||3 of 3 1|
|Repellency to Liquids, Sulphuric Acid (30%)||EN ISO 6530||>95 %||3 of 3 1|
|Resistance to Penetration by Liquids, Sodium Hydroxide (10%)||EN ISO 6530||<1 %||3 of 3 1|
|Resistance to Penetration by Liquids, Sulphuric Acid (30%)||EN ISO 6530||<1 %||3 of 3 1|